120V 30A 6-Circuit Non-Automatic Transfer Switch

Hi Ray,Thank you for reaching out. Yes, you can use this Transfer Switch as an alternate to use as a main AC breaker in an off-grid setup. If you have any follow-up questions, you may reach our support directly via (800) 975-7909, or email us at support@naturesgenerator.com. We'll be more than happy to assist you!

Hi Stephen,Thank you for reaching out. The conduit's length is 18 inches and 1 inch diameter. If you have any follow-up questions, you may reach our support directly via (800) 975-7909, or email us at support@naturesgenerator.com. We'll be more than happy to assist you!

Hi Stauffer,Thank you for reaching out. We currently don't have this type of inlet, however; it should work as long as the inlet's specification matches the transfer switch and the generator you're going to use it to. If you have any follow-up questions, you may reach our support directly via (800) 975-7909, or email us at support@naturesgenerator.com. We'll be more than happy to assist you!

Hi Jim,Thanks for reaching out. 120V 30A 6-Circuit Non-Automatic Transfer Switch might be compatible with the Honda EU3000is generator as long as the specification of the generator is within the capacity of the transfer switch which is 120 volt 30amp. We strongly suggest you reach out to the manufacturer of your generator to confirm the compatibility of the transfer switch with your generator. If you have any follow-up questions, you may reach our support directly via (800) 975-7909, or email us at support@naturesgenerator.com. We'll be more than happy to assist you!

Hi Jim,Thanks for reaching out. This transfer switch is designed to be used for indoors. If you have any follow-up questions, you may reach our support directly via (800) 975-7909, or email us at support@naturesgenerator.com. We'll be more than happy to assist you!

Hi Wayne,Thanks for reaching out. As of now, we don't have a 120v 30 6-circuit Manual Transfer Switch that's weatherproof. However, we will take this as feedback so we can improve our products in the future. If you have any follow-up questions, you may reach our support directly via (800) 975-7909, or email us at support@naturesgenerator.com. We'll be more than happy to assist you!

Hi Michael,Thanks for reaching out. Running the 10AWG wire from the outdoor inlet connection to the transfer switch might work. However, we highly suggest you hire a qualified technician to install the transfer switch as the outdoor inlet you'll be using is a third-party product to ensure a smooth and secured installation.Regarding the wire gauges from each circuit, the first two circuits uses 10AWG wires while 12AWG on the remaining four. If you have any follow-up questions, you may reach our support directly via (800) 975-7909, or email us at support@naturesgenerator.com. We'll be more than happy to assist you!

Hi Gino,Thank you for reaching out. According to our team, a multiwire branch circuit is not compatible with the non-automatic transfer switch. If you have any follow-up questions, you may reach our support directly via (800) 975-7909 or email us at support@naturesgenerator.com. We'll be more than happy to assist you!Regards,Nature's Generator Support Team

Hi Gary,Thank you for reaching out! We do not have the specific length of the wires since they are installed inside the transfer switch; however, you can install the transfer switch beside your breaker panel at least 16 inches or closer to make sure that the wires can be connected properly. If you have any follow-up questions, you may reach our support directly via (800) 975-7909, or email us at support@naturesgenerator.com. We'll be more than happy to assist you!Regards,Nature's Generator Support Team

Hi Dan,Thank you for reaching out! The suggested distance between the transfer switch and the panel box is approximately 18 inches so we can make sure that the wires will be connected on the breakers you wish to use in case of power outage. If you have any follow-up questions, you may reach our support directly via (800) 975-7909, or email us at support@naturesgenerator.com. We\'ll be more than happy to assist you!RegardsNature\'s Generator Support Team

Hi Loren,Thank you for your question. You can make sure that the circuit breaker doesn't exceed the supported amperage so that it won't trip. Also, make sure to monitor the watt usage of the certain circuit. If you have any follow-up questions, you may reach our support directly via (800) 975-7909, or email us at support@naturesgenerator.com. We'll be more than happy to assist you!Regards,Nature's Generator Support Team

Hi Maverick,Thank you for reaching out! You can extend the wires as long as you follow the same wire gauge of the transfer switch. If you have any follow-up questions, you may reach our support directly via (800) 975-7909, or email us at support@naturesgenerator.com. We'll be more than happy to assist you!Regards,Nature's Generator Support Team

Hi John,Thank you for reaching out! You can use an inlet box so that you can extend the distance between the transfer switch and the generator or the back up power. If you have any follow-up questions, you may reach our support directly via (800) 975-7909, or email us at support@naturesgenerator.com. We'll be more than happy to assist you!RegardsNature's Generator Support Team

Hi Joe, Thank you for reaching out! The Elite transfer switch is not compatible with double pole or 240v breakers however, based on your needs, you can check our Powerhouse transfer switch since it is compatible with 240v for line 1 and 2. If you have any follow-up questions, you may reach our support directly via (800) 975-7909, or email us at support@naturesgenerator.com. We'll be more than happy to assist you!Regards,Nature's Generator Support Team

Hi Robert,Thank you for reaching out! We only have 6 and 12 circuit breakers for 30 amp and 120v transfer switch. If you have any follow-up questions, you may reach our support directly via (800) 975-7909, or email us at support@naturesgenerator.com. We'll be more than happy to assist you!Regards,Nature's Generator Support Team

Hi Cindy,Thank you for reaching out. You can use the Elite transfer switch with different brand generators as long as they have an outlet to plug the transfer switch. Also, the maximum wattage output of the Elite transfer switch is 3600 watts only and it's compatible with 120v only. If you have any follow-up questions, you may reach our support directly via (800) 975-7909, or email us at support@naturesgenerator.com. We'll be more than happy to assist you!RegardsNature's Generator Support Team

Hi Paul,Thank you for reaching out. We suggest using the original-sized wires of our transfer switch as it might void the warranty of the item in case it got damaged by using a different set of cables. However, if you need more than 18", you may use wire nuts to extend the length of the cables. If you have any follow-up questions, you may reach our support directly via (800) 975-7909, or email us at support@naturesgenerator.com. We'll be more than happy to assist you!

Hi Hugh,Thank you for reaching out with your concern. You can use an extension cord to extend the Power Cable of the Power transfer kit switch Elite however, please make sure that the extension cord that you will use has the same wire gauge to make sure that it can handle the power from the EV. If you have any follow-up questions, you may reach our support directly via (800) 975-7909, or email us at support@naturesgenerator.com. We'll be more than happy to assist you!Regards,Nature's Generator Support Team

Hi Mark,Thank you for your query! The Elite power transfer kit can support 30 amp on 1 and 2 circuit while the rest of the circuits can be upgraded up to 20 amps only. Also, please be informed that the Elite power transfer switch is has a six 15 amp breakers as default. If you have any follow-up questions, you may reach our support directly via (800) 975-7909, or email us at support@naturesgenerator.com. We'll be more than happy to assist you!