Help Center
Nature's Generator 350W Wind Turbine
Product Information
| Rated power | 350 watts @ 27 MPH |
|---|---|
| Maximum wind speed | 110 mph |
| Wind turbine cable connectors | weatherproof M19 3P connectors |
| Wind input connectors | Anderson connectors |
| Yaw | fits 1.5 Inch schedule 40 pipes or towers |
| Wind turbine blades | fiberglass nylon composite |
| Wind turbine body | cast aluminum alloy with powder coating |
| Wind turbine cable | 12AWG pure copper cable |
| Rotor diameter | 63 in / 1.6 m |
| Weight | 37 lbs./17 kg wind turbine body |
| Certifications | CE Rohs |
Get Your Estimated Runtime
Input power cannot exceed 10,000W. Runtime shown below is based on the selected option.
Input Your Device Wattage
Runs for:
00hrs
Note: Runtime shown is for reference only. Actual results may vary.
Manuals & Downloads
FAQ's
The turbines begin producing rated output around 27 mph and can operate up to 110 mph maximum wind speed
The body and components are designed for outdoor use with weather-resistant materials, but take care in extreme conditions.
It depends on the model. The 150W wind turbine works with Nature’s Generator Standard 1800, Lithium 1800, Elite and, Lithium 3600 Model, while the 350W wind turbine is compatible with the Lithium 6000, Powerhouse, and MyGrid systems designed for higher wind power input.
Our wind turbine is designed to mount on a nominal 1.5 inch schedule 40 steel tubing or piping. The outside diameter of the tubing or piping shall be around 1.875 to 1.900 inch. Under no circumstances should plastic pipe be used to construct a tower. Tower must be capable of withstanding 160 pounds of load in the horizontal direction at the wind turbine.
We recommend that you set up the wind turbine at least 20 to 30 feet above any nearby obstructions.